How to deal with common faults of winding packaging machine.
In the actual production process, due to improper operation, improper maintenance or the quality of the equipment itself, there will inevitably be some more or less problems or faults in the winding packaging machine. How to correctly predict and detect the cause of the fault, and how to take effective measures to repair the fault problem? MQSPACK gives you a brief summary of some small experiences.
1.First of all, in the event of a failure of the winding packaging machine, the maintenance personnel can distinguish and judge in the following ways:
2. Observe the condition of the fault position and the working type of the parts;
3. Smelling, too high temperature may cause parts to be burned out, through the sense of smell to determine whether there is a suspicious smell emitted from the relevant parts of the machine;
4. Listen to the sound and distinguish the location of abnormal sound.
5. Touch, judge the temperature of the fuselage by touch, and whether the vibration frequency and amplitude of the machine are normal or not.
MQS also summed up several common faults of the winding packaging machine, as well as simple treatment methods:
1. when the equipment is just started up, the operator first needs to check whether the external power supply is connected, and then re-power, secondly, check whether the internal power supply is turned on.
2. when the turntable of the winding machine does not turn, first check whether the frequency converter is burned out, if not, check the frequency converter parameter settings, if something goes wrong, it needs to be reset.
3. When the membrane frame is moving and running, check the degree of lubrication between the inner and outer chains of the chain, add appropriate amount of mechanical oil, or eliminate it by tightening the chain.
4. When the turntable slows down or slips, open the turntable motor cover, loosen the four connecting bolts on the deceleration mounting plate, and then adjust the two tension bolts clockwise to achieve the required tension force, and tighten the four connecting bo
Contact Person: Mr. Joe Tao